Yueqing Wonke Electric Co.,Ltd


2 Conductor Through Terminal Block

Part No.: 282-101
Material: Engineering PA 66 with corrosion-resistant copper metal.
Connection: Spring cage connection
Rated Voltage/Current: 800V/41A
Cross Section: 6mm²
Brand Name: WonkeDQ

Send InquiryChat Now

282-101 2 conductor through Terminal Block

Din Rail Spring Terminal Block WAGO 


The spring feed through terminal blocks is based on spring clamp connection , an electrical connection is established by clamping the striped conductors. Especially used in the automotive and commercial market including railway industries.  

◆ Made from PA 66 with corrosion-resistant copper metal.

◆ Fast installation, completely vibration-proof and maintenance-free.

◆ With universal foot for 35mm Din Rail.

◆ Easy for mounting or dismounting.

◆ All types of accessories available: End cover, End Stopper,Marker strip, Bridges, etc.

Technical Parameters

Model Number



Grey, other color can be customized

Length/Height/Wide (mm)


Connection method

Spring-cage connection


Nylon PA66

Rated Voltage/Current


Cross section

0.5-6 mm² 

Conductor Size

24-10 AWG

Mounting Type

NS 35/7.5


IEC 60947-7-1


WonkeDQ,  LOGO can be customized

Packing Detail

11.08g/pc, 50PCS/BOX,1400PCS/CTN




1.gif    3.gif  4.gif  5.gif

6.gif  8.gif  9.gif  9.gif  10.gif279_122.jpg

Secure Screw-in Connection
Always make sure that any electrical equipment is turned off before beginning work. For a screw-in connection, you will need to strip a small length of the insulation from the end of the wire. Normally, around one inch is sufficient but this will depend on the used terminal blocks. Unscrew the retaining screw from the terminal block then insert the wire into the hole. Tighten the screw into place. Make sure that it is fully tightened because if the wire is left loose, it will begin to heat up and melt the insulation. Over time, this could result in a fire so take a little extra time to make sure that it is secure.
Secure Spring Connection
Position the terminal block and run the electrical wires to it by using a screwdriver to open the conductor hole. Press firmly to ensure that the connection is secure and won't come loose in the event of any subsequent movement.

Hot Tags: 2 conductor through terminal block, China, suppliers, manufacturers, factory, wholesale, cheap, free sample, made in China
Related Products