Search

Home > Knowledge > Content
Specification for reliability and standards for use in plug-and-pull terminals
Jul 31, 2018

     The plug-and-pull terminal is connected by two parts, one part will tighten the line and then plug into another part, which is welded to the PCB board. This mechanical principle of the bottom, this vibration-proof design to ensure that the product long-term gas-tight connection and the use of finished products reliability. Sockets can be installed at both ends of the ear, the assembly of ears to a large extent can protect the connectors and can prevent the placement of the patch is not good, and this socket design can ensure that the socket can be inserted correctly into the matrix. Sockets can also have assembly buckles and locking buckles. The mounting buckle can be securely fastened to the PCB board and the locking buckle can lock the mother and socket after the installation is complete. Various socket designs can be paired with different parent inserts, such as horizontal, vertical, or tilt to printed circuit boards.


     You can choose either metric AWG or standard AWG. The plug-and-Pull fast terminal series is connected by a variety of parts using an easy-to-use pluggable connection combined with a solid, universal screw. Plug-and-pull fast terminals are connected by two parts of the plug, a part of the line pressure, and then inserted into another part, this part of the welding to the PCB board. This mechanical principle of the bottom, this vibration-proof design to ensure that the product long-term gas-tight connection and the use of finished products reliability.


      Plug-and-pull terminal terminals can be installed at both ends of the ear, the assembly of ears to a large extent can protect the connectors and can prevent the placement of the patch is not good, and this socket design can ensure that the socket can be inserted correctly into the matrix. Plug-and-pull terminal if the terminal is black, one of the possibilities is not necessarily burning black, oxidation may also be black. So how do we verify that it's blackened? 


     The way we do this is to rub it with our fingers, and if we can erase it, like soot, it's the black substance that's oxidized, and it has to be sanded or a file to grind it off. The key of grounding lies in low grounding resistance and large contact area. Plug-and-pull terminals the former can ensure that the site has a close to the earth potential of the lowest possible  "0 potential ", which can avoid you want to thunder after the Thunder from the grounding line  "Drag " back, the possibility of channeling into the power supply circuit. The latter can ensure sufficient capacity to provide a fault current channel, plug-and-pull terminal includes lightning or short-circuit fault and so on. Plug-and-pull terminals because the actual construction technology has always been based on the current technology and technology changes, so this grounding method can not, good, but also to see how the new Standard Rules.


Related Industry Knowledge